FLUENTPOWER FSP400C-2 submersible utility pump with adapters, check valve and nylon rope

COMPACT TOP-OUTLET · Model FSP400C-2

TOP-OUTLET DRAINAGE
FOR TIGHTER SETUPS.

A compact manual-control utility pump whose upward discharge reduces lateral hose clearance, built for everyday household drainage and water transfer.

$49.99 USD

In stock

2,500MAX GPH
23 ftMAX HEAD
1/2 HPPOWER
Manual-control operation 16.4 ft power cord and 26 ft nylon rope Confirm outlet connection before use

Verified product details.

Specifications below are taken from the FSP400C-2 manual supplied on August 16, 2026; final-version confirmation remains open.

CURRENT SUPPLIED MANUAL · FSP400C-2
POWER1/2 HP
MAX FLOW2,500 GPH
MAX HEAD23 ft
MAX SUBMERSION13 ft
MAX SOLIDS1/5 in
MAX WATER TEMP95°F
POWER SUPPLY110–120V / 60Hz
MAX CURRENT3.5 A
PROTECTIONIPX8
CONTROLManual
POWER CORD16.4 ft
NYLON ROPE26 ft
STARTING WATER LEVEL4 in
LOWEST WATER LEVEL0.4 in
DISCHARGE PORT1-1/4 in male NPT
DIMENSIONS10.8 × 6.2 × 7.1 in
MODELFSP400C-2

Flow changes with lift.

Measure the vertical rise before choosing a pump. The supplied manual lists flow at five lift heights.

SOURCE→PUMP→OUTLET
LIFT HEIGHTFLOW RATE
0 ft2,500 GPH
5 ft1,680 GPH
10 ft1,100 GPH
15 ft620 GPH
20 ft250 GPH

Choose how you'll connect.

Start with the end of your hose or pipe, then match both the connection type and size.

Current supplied manual, page 2 — Hose Adapter Introduction
FSP400C-2 manual line drawings reordered with three threaded connection options followed by one plain-hose and clamp option
REORDERED FOR SELECTION · SOURCE LINE ART: CURRENT SUPPLIED MANUAL PAGE 2 · MANUAL REFERENCES RETAINED BELOW
01

THREADED HOSE OR PIPE

Use a matching threaded end. Confirm both the nominal size and the NPT or GHT standard before connecting.

A
3/4 in GHTGarden-hose thread connectionMANUAL REF A
B
1 in NPTNPT threaded connectionMANUAL REF B
C
1-1/4 in NPTDirect NPT threaded connectionMANUAL REF D
Approved FSP7501C-1 line drawing of the shared 3/4 inch GHT coupling
02

PLAIN HOSE + CLAMP

For smooth-bore hose without a threaded end. Slide a 1-1/4 in ID hose over the barb and secure it with a correctly sized clamp.

D
1-1/4 in IDPlain hose inner diameterMANUAL REF C
Manual line drawing of the included stepped 1 inch NPT and 1.25 inch barb coupling

FIELD NOTEThe supplied manual identifies NPT and GHT threaded connections plus one 1-1/4 in ID plain-hose connection. Match the connection standard and nominal size before installation.

Know the use limits.

Use the pump only within the operating limits stated in the supplied manual.

MANUAL & SUPPORT
FIT

Household water transfer, temporary drainage and similar water-moving jobs within the listed lift, temperature and solids limits.

NOT FIT

Do not use for flammable, corrosive, heated or seawater liquids. Do not operate where people are present in a swimming-pool area. Use a grounded GFCI-protected supply.

WARRANTY

12-month limited warranty from the original consumer purchase date, subject to the terms in the manual.