FLUENTPOWER FSP250C-1A submersible utility pump with two outlet adapters and nylon rope

COMPACT & DIRECT · Model FSP250C-1A

COMPACT. DIRECT.
READY TO MOVE WATER.

A compact manual-control utility pump for temporary drainage and water transfer, with a direct 1 in NPT pump outlet and two included adapters for a simpler setup.

$49.99 USD

In stock

1,900MAX GPH
23 ftMAX HEAD
1/4 HPPOWER
Manual-control operation 16.4 ft power cord and 26 ft nylon rope Confirm outlet connection before use

Product details.

These values are taken from the final supplied FSP250C-1A instruction manual.

FINAL MANUAL · FSP250C-1A
POWER1/4 HP
MAX FLOW1,900 GPH
MAX HEAD23 ft
MAX SUBMERSION13 ft
MAX SOLIDS1/5 in
MAX WATER TEMP95°F
POWER SUPPLY110–120V / 60Hz
MAX CURRENT2.3 A
PROTECTIONIPX8
CONTROLManual
POWER CORD16.4 ft
NYLON ROPE26 ft
STARTING WATER LEVEL6 in
LOWEST WATER LEVEL0.6 in
DISCHARGE PORT1 in male NPT
MODELFSP250C-1A

Flow changes with lift.

The final manual lists flow at 0, 5, 10, 15 and 20 ft of total lift.

SOURCEPUMPOUTLET
LIFT HEIGHTFLOW RATE
0 ft1,900 GPH
5 ft1,780 GPH
10 ft1,500 GPH
15 ft1,150 GPH
20 ft600 GPH

Choose how you'll connect.

Start with the end of your hose or pipe, then match both the connection type and size.

Final supplied manual; installation diagram page 2 and specification table page 8
FSP250C-1A actual catalog-photo crops showing the upright 3/4 inch GHT coupling, direct green 1 inch NPT pump outlet and upright 1 inch hose-barb coupling
ACTUAL PRODUCT-PHOTO CROPS · FINAL MANUAL PAGE 2 + PAGE 8
01

THREADED HOSE OR PIPE

Use the supplied GHT coupling for a garden hose. For 1 in NPT pipe or fittings, connect directly to the pump's green threaded discharge port—no extra black adapter is used.

A
3/4 in GHTGarden-hose thread; installation shown on manual page 2MANUAL REF P2-A
B
1 in NPTDirect green pump outlet; no additional adapterMANUAL REF PORT-B
Actual product-photo crop of the included 3/4 inch GHT coupling
02

PLAIN HOSE + CLAMP

Slide a 1 in ID plain hose over the supplied stepped barb and secure it with a correctly sized clamp, following the installation shown on manual page 2.

C
1 in IDPlain discharge hose + clamp; installation shown on manual page 2MANUAL REF P2-B
Actual product-photo crop of the included stepped hose-barb coupling

FIELD NOTEThe manual shows the 3/4 in GHT and 1 in ID + clamp installations on page 2. The 1 in NPT path connects directly to the pump's green male-threaded outlet and does not use an extra black adapter.

Know the use limits.

Use the pump only within the operating limits stated in the approved final manual.

MANUAL & SUPPORT
FIT

Temporary household water transfer and drainage within the listed lift, temperature and solids limits.

NOT FIT

Do not pump flammable, explosive, corrosive or heated liquids. Do not operate where people are present in a pool or similar water area. Use a grounded GFCI-protected supply.

WARRANTY

12-month limited warranty from the original consumer purchase date, subject to the terms in the manual.